Beschreibung
Not at home on Halloween? That can end badly. Unless you have a candy dispenser. We presented a possible keeper in the box in this project.
All you need is a microcontroller, LEDs and buttons as well as a powerful servo motor, plus some DIY stuff and creativity.
The following products of the project are included in the bundle:
- 1x Microcontroller board AZ-ATmega328 board
- Jumper wire cable 3 x 40 pcs. 20 cm M2M / F2M / F2F
- 1xBreadboard
- 1xMicro servo motor MG90S
- 1xKY-004 Button module
- 1xGC9A01 1.28 inch round LCD TFT display
- 1xMini MP3 player DFPlayer Master module
- 1xDFPlayer Mini 3 Watt 8 Ohm mini loudspeaker
- 2xred LEDs 3 mm diameter
- 2×330 Ohm resistors
- 1x1K ohm resistor
- 1xMB102 Breadboard Power Suppler Power supply
These products are additionally required depending on the implementation:
- 3 mm thick balsa wood and white
wood glue
Click here for the blog article:
- Halloween 2024 – Candy dispenser
Bewertungen
Es gibt noch keine Bewertungen.